OUR PRODUCTS

PRODUCT CATALOG

OVERSTOCK PRODUCTS

ACP is proud to offer an extensive line of pneumatic cylinders. Years of experience in cylinder manufacturing, insures that our customers will receive top quality materials and workmanship. The 1 ¾" through 6" bore cylinders featured in the product guides above provide direct replacements for most weld cylinder applications. Our in house design capability also allows us to develop different mounting styles, rod ends and porting configurations so that our cylinders can be used in a wide variety of applications.

Benefits

• Heavy duty construction. Made of quality materials for long lasting reliable service.
• Many mounting styles and rod ends available for interchangeability.
• Support staff ready to assist you in choosing the right ACP cylinder for your application.

• Cylinder bodies are of damage resistant heavy wall construction with corrosion resistant nickel plating.
• Piston rods are precision machined, hardened and chrome plated to provide maximum wear life.
• Retaining bushings are precision machined steel, specially treated for maximum bearing support and wear resistance.
• Cylinders come standard with Buna-n  o ring seals but other options are available.
• Ports are NPTF standard but other options are available.

Options

• Optional seal materials are available such as Viton, or polyurethane.
• Optional ports and port locations are available. BSPT can be supplied.
• Proximity switch options are available.

back to top

ACP has developed a pre-lubricated line of pneumatic cylinders. They are a perfect fit in situations where adding in-line lubrication is either not allowed or too difficult. Special lubrication reservoirs are designed into the cylinder, which keep the seals and moving parts lubricated without the need of adding oil to the supply lines. Special long lasting seals and wear bands are employed to provide for a long leak free cylinder life. Finally, heavy-duty rod wipers are used to help keep out water and contaminants in unclean environments. These special features not only allow the cylinder to function without in-line lubrication, but also help make our prelube cylinders long lasting, maintenance free, and very rugged.

• Bronze filled Teflon wear strips are long lasting even under dry conditions, helps keep contaminants from cylinder wall.
• Long lasting, wear resistant urethane o-rings.
• Heavy-duty urethane rod wipers are standard for most prelube cylinders to keep contaminants out.
• Lubrication reservoirs located throughout keep lubrication on moving parts.
• Long lasting rotate or anti-rotate retaining bushings
• Most popular mounting styles are available, special mounts can be made if requested.

back to top

ACP also offers hydraulic cylinders. They are manufactured from the same heavy duty, quality materials as our pneumatic cylinders. And, as always, our reliable support staff is ready to assist you with your application needs.

• Cylinder bodies are of damage resistant heavy wall construction with corrosion resistant nickel plating.
• Piston rods are precision machined, hardened and chrome plated to provide maximum wear life.
• Retaining bushings are precision machined steel, specially treated for maximum bearing support and wear resistance.
• Cylinders come standard with Buna-n  o ring seals but other options are available.
• Ports are NPTF standard but other options are available.
• 1-7 sq. in. cylinders are standard.

• Optional seal materials are available such as viton, carboxilated nitrile, polyurethane or call us with the fluid used for other options.
• Optional ports and port locations are available. SAE or metric ports can be supplied.
• Special bore sizes can sometimes be made.
• Mounting configurations are available for spot welding, piercing, stamping and other applications.

These NFPA interchangeable cylinders are available in aluminum or heavy duty steel styles. They are designed and built to handle the most punishing applications. Our tie rod cylinders are pre-lubricated so line lubricators are not required. All NFPA mounting styles, piston rod sizes and rod ends are available. Please contact ACP for application support or cross-referencing assistance.

Standard Features

• Cylinder bodies are made from aluminum that has been hard coat anodized. This produces a very hard, wear and corrosion resistant surface.
• Piston rods are precision machined, hardened and chrome plated to provide maximum life.
• Rod bushings are precision machined steel, specially treated for maximum bearing support and wear resistance. Bushings made of oil impregnated sintered bronze are also available.
• The end caps are precision machined from aluminum and are anodized for corrosion resistance.
• Bronze filled Teflon® wear band used for strength and stability.
• Bore sizes range from 1 1/2" through 6"
• Long lasting piston and rod seals are nitrile u-cups.
• Heavy duty polyurethane rod wipers help to keep out water and other contaminates.

Options

• Optional seal profiles such as quad or t-seals are available.
• Other seal materials are available, viton, and carboxilated nitrile are examples.
• Optional ports and port locations are available. BSPT can be supplied.
• Proximity switch options are available.
• Cap and or head end cushions can be added, the cushion screws are captive to allow for safe fine cushion adjustment.
• Stainless steel rods and cylinder bodies are also available.

back to top

These compact, lightweight aluminum cylinders are designed to fit in tight spaces. A variety of mounting options are available, as well as double rod type cylinders. Pancake cylinders come standard as prelubricated but can be also ordered without the prelube features making them even smaller, for extremely tight space restrictions. These cylinders can also be made with a magnetic ring on the piston for proximity switches. Our pancake cylinders are very reliable and built to last

• Cylinder bodies are made from aluminum that has been hard coat anodized. This produces a very hard, wear and corrosion resistant surface.
• Piston rods are precision machined, hardened and chrome plated to provide maximum life.
• Retaining bushings are precision machined steel, specially treated for maximum bearing support and wear resistance. Bushings made of oil impregnated sintered bronze are also available.
• The end caps are precision machined from aluminum and are anodized for corrosion resistance.
• Bronze filled Teflon wear band used for strength and stability.
• Bore sizes range from ¾” through 4”
• Wear and abrasion resistant polyurethane o-rings provide for long maintenance free service life.
• Nominal pressure rating is 150 psi air.

• Optional seal profiles such as quad or t-seals are available.
• Other seal materials are available, viton, and carboxilated nitrile are examples.
• Optional ports and port locations are available. BSPT can be supplied.
• Proximity switch options are available.
• Heavy-duty polyurethane rod wipers are available to help keep out water and contaminates.

Some applications require the use of long stroke cylinders, such as weld guns with large tip openings. When long stroke cylinders are to be used, cycle times can usually be dramatically cut with the use of retract type cylinders. Retract cylinders have a built in pre-stroke position, allowing the cylinder to be fast stroked to the pre-stroke position. Then shorter strokes can be made with the final, or weld stroke. Time is saved by not having to full stroke the cylinder for every cycle.
 ACP retract cylinders are available in three or four port styles. Three port retract cylinders have one port dedicated to fully retracting the cylinder. Four port retract cylinders have a separate port for retract return and for weld return. Standard ACP three port retract cylinders come in thirteen different bore sizes from two inches to six inches. Two inch weld stroke is standard but others are available upon request.
 Many different mounting and rod end options are available. Prelubricated and proximity switch options are also available. All of the features noted make ACP retract cylinders very useful in a wide variety of applications.

Most ACP cylinders are available in proximity switch ready versions. These cylinders   come ready to accept inductive proximity switches that read when the piston rods are fully retracted. Inductive proximity switches are contact-less, vibration resistant, and they operate with fast switching speeds. Contact-less operation has no moving parts resulting in long service life. Corrosion resistant, weld field immune proximity switch versions are available which prevent false triggering when in the presence of strong electromagnetic fields.
 Our proximity switch cylinders are available with several different proximity and port locations. Please call for mounting styles, proximity and port positions, and proximity switch connector style availability.

ACP can provide a metric version of all air and hydraulic cylinders that we manufacture. Any cylinder that is featured in the product guides above can be made with metric ports, and most
can also be made hard metric with standard metric bore sizes, strokes, seals and fasteners. Tie
rod type cylinders are also available in several different metric bore sizes. Please call for available sizes and mounting configurations.

ACP keeps a large inventory of cylinder parts. If you need a spare part for a cylinder call or e-mail us for prompt delivery. Even if you need a hard to find cylinder part made by another company other than ACP, you can send the worn or broken part to us and we will quote a replacement.

back to top

Seal kits for all ACP cylinders are available for quick delivery. The same service applies to seal kits as spare parts, if you need a hard to find seal or seal kit for a cylinder or related piece of equipment you can send the worn kit parts to us and we will quote a replacement. We can stock any kits or seals if you require immediate accessibility.

back to top

ACP can provide new replacement TG style pneumatic cylinders. These lightweight and reliable weldgun cylinders have been an industry standard for many years. They are designed and built with quality and durability in mind. If you are looking for replacement TG type cylinders built with genuine TG systems parts, or an extremely lightweight durable prelubricated cylinder, look no further than ACP. Call or e-mail our friendly, knowledgeable staff for price and delivery.

back to top

ACP offers weld gun refurbishment for all TG Systems weld guns. The standard weld gun refurbish quote consists of the following services.

• Measure and record tip force
• Dismantle, clean and inspect all parts for wear or damage
• Rebuilding of cylinders
• Replacement of pivot pins, bushings, bearings and spacers
• Replacement of flash guards
• Replacement of equalizing cylinder
• Replacement of insulators, stops, and bumpers.
• Repair or replacement of any other damaged or worn parts
• Testing of gun for tip alignment, electrical shorts, cylinder stroke, tip force, water flow, transformer operation.

back to top